Motogadget Motoscope Pro BMW R9T
The motoscope pro BMW R9Te is the only plug & ride instrument on the market.
The CAN-Bus interface of the motoscope pro enables the complete display of all original functions (except settings for heated grips). The original plug connector for the original wiring loom makes the instrument a real plug & ride solution and very easy installation.
A LED matrix display enables an ultra-thin housing design.
734 LEDs, controlled by a 16-bit RISC processor – create an almost rimless, self-illuminating display. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.
The rev-counter is displayed fully scalable via the analog LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.
Four indicator lights are pre-installed and can be used for far more input signals.
The billet aluminium casing is CNC-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE approval.
motoscope pro with ca. 70 cm connector cable, 2 stainless steel screws, detailed installation and operating instructions.
Matching bracket for the BMW R9T sold separately.
Specifications and Features:
Please note: Touch sensor not included anymore, BMW Alarm System may not work with motoscope pro installed, Heated-Grip-Control may not work.
Length, Height, Depth: 109 mm/ 47 mm/ 11 mm
Weight: appr. 100 g
Mounting: 2 x M3 threaded hole
Power consumption during operation: max. 200 mA (load dependent)
Power consumption in standby: 0.4 mA
Operating voltage: 9 V – 15 V
Operating temperature: -20°… +80°C
Feature Measuring Range:
Rev counter (LED bar graph): 0 – 6, 8, 10, 12, 14, 16, 18 rpm (adjustable)
Speedometer: 0 – 350 km/h or mph
Trip meter A: bis 999.9 km or mi
Trip meter B: bis 999.9 km or mi
Total mileage (adjustable): bis 250000 km or mi
Operating hours/Service: 0 – 9999.5 h
Clock: 23:59 h/min
Time keeping: 0 – 99:59:59 h/min/s
RPM count (numerical): 0 – 20000 rpm
Adjustable RPM warning (gear shift light): 0 – 20000 rpm
Onboard voltage: 9 – 18 V
Low voltage warning: Warning if below ca. 11V
Time keeping: 0 – 100 km/h or 0 – 60 mph 0.00 – 30.59 sec.
Actual accelleration: +/- 0.00 – 1.50 G
Average speed: 0 – 350 km/h or mph
Max. speed: 0 – 350 km/h or mph
Max. RPM: 0 – 20000 rpm
Max. positive acceleration: +1.50 G
Max. negative acceleration: – 1.50 G
Gear display: N, gear 1 – 6
Green control: LED
Green control: LED
Turn indicator: left/right
blue control: LED
Red control: LED
Miscellanious warning functions like: Check Engine, ABS, low fuel
Fuel/Reserve: low fuel warning