Motogadget M.Lock and M.Unit Blue Bundle

£350.00 inc. VAT


Motogadget M.Lock and M.Unit Blue Bundle

This is a VERY limited Bundle offer for 1 x Motogadget M.Unit Blue and 1x M.Lock

Category: Brand:


Motogadget M.Lock and M.Unit Blue Bundle

This is a VERY limited Bundle offer for 1 x Motogadget M.Unit Blue and 1x M.Lock

Motogadget m.unit blue

An all in one Bluetooth Digital Control Box, Fuse box. and Flasher Unit

The new Motogadget m.unit blue has moved on from the established previous version by undergoing significant development and improvements. It is now equipped with 12 inputs and 10 outputs, replaceable high-quality cable clamps and, most notably, Bluetooth® LE. This enables the m.unit blue to be connected to our m.ride’ smartphone App. This feature is unique for motorbike accessories.

The m.ride App manages the entire setup and alarm system. Fault diagnostics can also be performed during operation and without having to remove the m.unit. The secure, encrypted Keyless Go function can also be used.

When this function is activated and you approach your motorbike with your smartphone, the onboard electrical system is activated and the motorbike is ready to be started.

The m.unit blue is the digital control unit for your motorbike – the heart of the entire onboard electrical system. It can be operated using buttons or using conventional handlebar switches. It controls all necessary components on the vehicle while also performing fuse functions.

There are considerably fewer relays and individual components in the wiring harness and the vehicle can be rewired with less effort in a very short amount of time.

When using the m.button, all switch connections are reduced to one single cable.

Features WITHOUT smartphone and m.ride App
Complete digital control using buttons possible with 4 or 5-button operation.
Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off if there are faults. After the fault is rectified, the safety function is automatically reset.
An integrated alarm system that can be installed in any position.
Integrated, digital flasher relay that is load-independent; automatic switch-off optional and can be set; m.wave mode can be selected.
Integrated hazard warning light.
Turn signal can optionally be set as a positioning light.
Integrated parking light and headlight flashing.
Lo-beam and Hi-beam (up to 200 W switched capacity) can be controlled using only one button.
Integrated, digital brake light modulator; flashing mode can be programmed.
Acceleration-controlled emergency brake light (automatic warning signal).
Integrated starter relay for the starter system with solenoid (up to 30 A switched capacity).
Intelligent and configurable management/switch-off of power consuming devices so that the maximum starting energy from the battery can be used when starting the motorbike.
Integrated, digital horn relay.
Two configurable additional outputs AUX1 and AUX2.
Diagnostics function for assigning inputs, outputs, the circuit switching status, short circuit diagnostics etc.
Calibration and current measurement enable faults to be detected on all lamps.

Features WITH smartphone and m.ride App
Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and motogadget m.unit blue energy usage.
Keyless Go (the on-board electrical system is switched on when you approach the motorbike with your smartphone).
Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor etc.).
Alarm system mode and sensitivity can be adjusted.
The on-board voltage can be monitored in the App.
Diagnostics on all inputs and outputs; current, voltage and device temperature measurement.
Real-time audio fault messages issued via the helmet headset.
Outputs can be switched manually via smartphone (except for starter).
Firmware updates provided anywhere via smartphone and App without removal.
Setup menu can be configured anywhere via smartphone and App without removal.
Speedometer input for comparing the vehicle mileage with m.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs etc.
Logbook for recording journeys and displaying the vehicle status, alarm events and maintenance tasks.
Parking position display and Ping! for help locating the vehicle.
LIN bus connection for connecting to compatible motogadget products at a later date.

Technical requirements
The m.ride App is now available for Android (from version 6.0) and for iOS (from iPhone 5) shortly thereafter. The modern Bluetooth® LE is used to couple the m.unit blue with the smartphone. This requires certain requirements for the smartphone’s hardware.

The following Android models are currently compatible:

Samsung Galaxy S7/S7 Edge
Samsung Galaxy S6/S6 Edge
Samsung Galaxy S5/S5 Neo
Samsung Galaxy Note 4
Samsung Galaxy Note 5
Samsung Galaxy Tab A (2016)
Samsung Galaxy Tab 4 7.0
Samsung Galaxy Tab S2 10.5
Google Pixel/ Pixel XL
Google Nexus 5
Google Nexus 5X
Sony Experia Z3 Compact
OnePlus 3/OnePlus 3T
Huawei P9/ P9 Plus

We intend to make further smartphone models compatible in the next few weeks. Please note that we have to determine priorities and cannot consider every single device.

Further information on the App can be found at or in Google Play.

Motogadget m.unit blue Contents:

motogadget m.unit blue
Approx. 50 cm connecting cable for battery positive terminal with 10 mm² cross section
2 cable eyes
1 x M5 stainless steel bolt
2 x M5 stainless steel bolts with nut
1 x speed sensor with 2 magnets
Detailed installation and operating instructions

Motogadget m.unit  blue specifications and features:
L/W/H 90 x 53 x 30 mm, bolt distance 74 mm
Weight Approx. 180 g
Fastener 2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery Plus
Operating voltage 6 V – 20 V
Operating temperature -20°… +80°C
Inputs 1 x input (+12 V switched) for ignition lock or m.lock11 x control input (minus/switched to ground) for:
Left turn signal
Right turn signal
Stand switch
LIN bus
Outputs 10 x Outputs (+12V) for:
Left turn signal
Right turn signal

Motogadget M-Lock RFID Ignition Lock

No hassle with keys, but just walk towards you bike and start it! Only make sure that your keychain is about 40-50mm from the m-Lock.

The M-Lock is a contact free digital ignition lock with RFID technology and substitutes mechanical ignition locks or their electrical switching feature respectively.

The associated digital key/transponder only has to be approached to the m-Lock (switching distance approx. 40-50 mm) and the ignition is switched on or off completely contact free.

The M-Lock is based on the latest RFID technology (Radio Frequency Identification) and therefore, unlike e.g. radio remote controls, tamper-proof. Each key/transponder has a unique digital code.
The M-Lock can be actuated with the correct digital code only.  Key/transponder and m-Lock are absolutely free of mechanical wear.
The M-Lock switches automotive relays with a possible load of up to 40A – sufficient power for every on-board system.

The hidden mounting of the small m-Lock, covered by non-metallic parts like e.g. a plastic side panel, permits completely removing the mechanic ignition lock. Clean look and various design possibilities are guaranteed – especially for custom bikes!

The available option ‘Glass Tube’ is so small (3 x 13 mm) that it can be sewn into the glove. Please note the reduced switching distance (about 5-10 mm) of the Glass Tube transponder. The 2 included standard keys (teardrop shape) are key fob sized.

All keys/transponders are available as a replacement ‘key blank’ and can be ‘taught’ to the desired m-Lock.

NOTE: We do not recommend using the m-Lock combined with immobilizers! Contact your dealer/manufacturer for informations about the possible deactivation of the immobilizer.

Dimensions and specifications
Transmitter/receiver, diameter of installed assembly: 30 mm
Height: 14 mm
Cable length: approx. 50 cm
Weight incl. cable: approx. 30 g
Fixture: 2 x M3 threaded hole on back side
Operating voltage: 6V – 18V
Operating temperature: -20 °C… +80 °C

Whats in the box.
• m-Lock with approx..

• 50 cm connector cable

• 1 user key and 1 master key (teardrop shape)

• 1 automotive relay 12V/40A

• 4 flat pins with isolating sleeves

• connector

• removable fuse

• detailed installation and operating instructions

All advantages summarized

  • RFID technology is tamper-resistant
  • each key has a unique code
  • the key first activates the m-Lock without touching it and then, via the relay, the entire on-board system
  • neither key nor m-Lock suffer from mechanical wear
  • the key requires no battery – failsafe
  • no overload or scorched pins possible due to indirect switching via the 40 A main relay
  • the m-Lock is very compact an can be mounted hidden in many places
  • water tight and vibration resistant because of the moulded-in construction
  • depending on the model, key sizes range from very small (key fob sized) to tiny (glass vial) and may be integrated into other objects like gloves, clothing, pendants (NON-METALLIC!) etc.
  • keys can be easily purchased and ‘learned’ to any m-Lock – your integrated locksmith
  • a switching distance of 4 – 5 cm ensures convenient switching while excluding the possibility of accidental engagement
  • An integrated LED shows the status of the m-Lock while mounting, connecting and ‘teaching’ new keys


There are no reviews yet.

Be the first to review “Motogadget M.Lock and M.Unit Blue Bundle”

Your email address will not be published. Required fields are marked *

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.

Pin It on Pinterest

Share This